Audeze Vero Reference Headphone Interface

$899.00

SKU: REAUDEZE-1/4M,1.5M


For More Information:

Call MIT Cables: 916.625.0129

Email: info@mitcables.com

VERO Personal Audio

Our Vero Personal Audio product orders are currently in process.

We will notify you via email once your order has shipped as well as send out status notifications.

Please contact MIT Cables with any questions you may have.

Like the Vero Full Range Headphone Interface, The Vero Reference Headphone Interface is designed to work with specific headphones, and is built using mini 4 PIN XLR connectors. The difference between the Vero Reference and the Vero Full Range is the amount of “Articulation Poles” in the network. The Vero Reference Headphone Interface also houses MIT Cables patented Multipole™ Technology, but has 21 Poles of Articulation instead of 12. The difference in what you hear is dramatic and has been described as “holographic”. The nine additional Articulation Poles synergistically work together to transport the audio signal with a more even, or flatter response than just a single cable.

The Vero Reference Headphone Interface also comes in three different input variations:

  • 3.5mm TRS 
  • 1/4” TRS
  • 4 PIN XLR 

 


Vero Reference Headphone Interface (PDF)


MIT Cables founder Bruce Brisson began purposefully designing audio cables in the 1970’s after encountering the sonic problems inherent in cables typical of the day. He later founded Music Interface Technologies in 1984 after patenting and licensing his early designs to other manufacturers, producing some of the audio industry’s most ground-breaking and seminal products. 

MIT Cables core audio cable technology is our exclusive Poles of Articulation, named after the fact that every audio cable has a single point where it is most efficient at storing and transporting energy. At this point in the audio frequency spectrum, the cable will articulate best, and represents the cables’ particular Articulation Pole.

Graph A: Represents the bandwidth of the audible range of the human ear. We will use this graph to describe how well a cable articulates across the audible bandwidth. The 50% line serves as our baseline for articulation response.

Continue Reading about Multipole™ Technology

Q: What are MIT Filterpoles™?
A: Poles of Attenuation

(as referenced in The Impedance Domain)*

A properly built AC filter will not only attenuate unwanted noise on the AC power line, but it will also optimize the power factor.

The best way to attenuate unwanted noise is to create a very low impedance (a zero of impedance across the load which acts as an attenuation pole to the noise) surrounding the frequency (or frequencies) of the undesirable noise. In the case of audio, that would be at any frequency other than the power line frequency. This is best accomplished by placing a tuned circuit in parallel, around the load. MIT was awarded this patent in November 9, 1993: number 5,260,862.

Also important is the Power Factor which is a (dimensionless) number between 0 and 1. When power factor is equal to 0, the energy flow is entirely reactive, and stored energy in the load returns to the source on each cycle. When the power factor is 1, all the energy supplied by the source is consumed by the load and nothing is reflected back to the source. MIT was awarded a patent on this technology regarding audio in July 13, 1993: number 5,227,962.

Continue Reading about Filterpole™ Technology

More Products